Bienvenue sur nanotronic.ch
YOUR ENGINEERING COMPANY
THINKING DIFFERENT
Bienvenue sur nanotronic.ch
YOUR ENGINEERING COMPANY
THINKING DIFFERENT

Du concept au produit

nanoTRONIC est un bureau d’ingénieurs établi à Lyss et à Zürich. Nous sommes spécialisés dans le développement de systèmes embarqués et de modèles VHDL complets dans un environnement réglementaire très exigeant. En outre, nous pouvons vous proposer des conseils, des tests ou des revues documentaires ou de design. Nous sommes aussi à même de vous mettre à disposition du personnel hautement qualifié pour lisser vos pics de charge. Nous restons à votre disposition pour toute demande d’information complémentaire.

Directeur de la société

DÉCOUVREZ-NOUS

Historique

La société nanoTRONIC SA a été fondée le 1er août 2000 et a inauguré son site de Mägenwil en 2007 et transféré à Zürich en 2021.

Environnement

Le respect de l’environnement nous tient à cœur. C’est pourquoi nous utilisons à Lyss exclusivement du courant écologique provenant d’une source régionale certifiée.

Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Sales Fragen:

 

Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Finance oder Administration Fragen:

 

Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei uElectronic Fragen:

 

Bitte kontaktieren Sie uns unter folgender E-Mail Adresse bei Software Fragen:

 

NOS PRODUITS

Présentation du produit. Pour toute demande de prix et informations détaillées, veuillez nous contacter.

sade

S-SADE

Solar Array Drive Electronics

The S-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:

Independent drive of both actuators

Bus Interface (MIL-STD-1553B)

High reliable

Full redundancy (cold)

Single Point Failure Free

Radiation hardness ≥ 100kRAD TID

Modularity

Interface Flexibility

Compact size

K-SADE

Solar Array Drive Electronics

The K-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:

Independent drive of both actuators

Commanded by commands (Frequency, Direction, On/Off)

High reliable

Full redundancy (cold)

Single Point Failure Free

Radiation hardness up to 100kRAD TID possible

Modularity

Compact size

k_sade
c_sade

C-SADE

Solar Array Drive Electronics

The C-SADE is a 2 axis redundant drive electronics to be used with stepping motor-based actuators (mainly SADM), with the following characteristic:

Independent drive of both actuators

Bus Interface (MIL-STD-1553B or CAN)

High reliable

Full redundancy (cold)

Single Point Failure Free

Radiation hardness 100kRAD TID

Modularity

Interface Flexibility

Compact size

Space Encoder System

Rotary / Linear Encoder for Space and Hi-rel Applications

The nanoTRONIC Space Encoder is a position encoder system for space and hi-rel applications. It is available in absolute and incremental variants to measure either rotary or linear positions:

System: Encoder scale, read head, optional interface electronics

Contactless position measurement with GMR effect (Giant Magnetoresistance)

Increased lifetime (compared to e.g. potentiometers)

Toothed wheel (or track) with teeth similar encoder scale

Magnetized pole rings or bars are possible

1 mm encoder pitch, 0.5 mm teeth

Different types of ferromagnetic steel can be used for the scale

encoder
swframework

nT SW Framework

Framework logiciel indépendant de la plateforme

Les applications sont implémentées quelle que soit la plateforme utilisée. Ceci est basé sur la structure logicielle interne, qui fait abstraction de toutes les dépendances matérielles et OS. Cela signifie que la réutilisabilité et la bonne testabilité sont automatiquement intégrées directement dans le flux de travail.

STM32Fx, ATMEL SAM Vxx, SPARC, PowerPC, Windows, Linux

STM32

nanoTRONIC’s STM32 Evaluation- and Prototyping-Board

Caractéristiques du produit:

STM32F103RFT6, STM32F103RGT7

Placement individuel des broches

Compatible avec le nT SW-framework

stm32
Sensitec_SpeedSensor

Sensitec Distributor

Distribution de produits spatiaux

NanoTRONIC AG reprend la distribution des produits Sensitec pour le secteur spatial dans le monde entier. Pour toute demande de produits et de prix, veuillez contacter notre service commercial à l’adresse e-mail suivante:

NOS SERVICES

Nos services en détail. N’hésitez pas à nous contacter si vous avez des questions.

Concepts de système

Nous élaborons des concepts de systèmes en fonction de vos attentes et associons votre idée à notre expérience dans les domaines de la microélectronique et de l’automation. Nous assurons d’entretenir avec vous une étroite collaboration afin de garantir que notre concept soit parfaitement adapté à vos besoins.

Études technologiques

Vous souhaitez lancer votre produit sur le marché plus rapidement et au meilleur prix?

Dans ce cas, démarrez le développement en exploitant la technologie adaptée. Nous considérons qu’il nous appartient de rechercher pour vous des solutions techniques et d’examiner des nouveautés. De cette manière, vous pouvez vous concentrer sur votre produit, votre service Recherche et Développement gagne en efficacité et vous lancez sur le marché plus rapidement et au meilleur prix un produit basé sur une technologie de pointe.

Gestion des technologies

La réussite du lancement de vos produits rapide et à moindres coûts est liée au choix d’une technologie adaptée. Nous nous engageons à employer les technologies les plus récentes tout en minimisant les risques.

Spécification

Dès le début, il est important d’établir une spécification précise pour ne pas perdre de vue l’objectif fixé. Une spécification parfaitement élaborée économise beaucoup de temps et d’argent au cours des phases de projet subséquentes. Forts d’une longue expérience, nous connaissons les points essentiels et vous apportons volontiers notre assistance dans le cadre de l’élaboration du cahier des charges.

Implémentation

Dans la pratique, les premiers travaux relatifs à la mise en œuvre de la spécification commencent déjà souvent avant la validation de la spécification. À ce moment-là, la difficulté consiste donc à évaluer des travaux pouvant être déjà démarrés et ceux pour lesquels il convient d’attendre la validation de la spécification définitive. Nous pouvons vous apporter toute notre assistance pour mener à bien ce travail.

PCB Design

Nous élaborons pour vous les schémas, layouts et documents de production requis pour la production de vos circuits imprimés. Au cours de ce processus, nous tenons compte du temps de propagation des signaux, du niveau des signaux, des impédances et des aspects CEM et adaptons en conséquence les paramètres des circuits imprimés.

Nous travaillons principalement avec les logiciels suivants :

  • Altium Designer
  • Mentor DxDesigner
  • Mentor Xpedition PCB
  • PADS Professional

Si vous le souhaitez, nous pouvons aussi mettre en œuvre votre conception dans Cadence Design ou OrCad.

Nous nous chargeons volontiers de la production de vos sous-ensembles électroniques.

Prototypage

Pendant le prototypage, nous traduisons votre spécification en modèle de fonction (proof of principle).

Nous disposons d’un grand nombre de cartes d’évaluation pour les processeurs et les FPGA que vous trouverez sous la rubrique « Compétences », « Conception matériel » et « SoC/FPGA/ASIC ». Celles-ci nous permettent d’implémenter rapidement vos exigences en matière de conception.

Selon la quantité prévue, nous intégrons volontiers votre conception. La production lors de la phase de prototypage va donc de la carte d’évaluation sur laquelle sont implémentées toutes les fonctions souhaitées à la solution entièrement intégrée parfaitement adaptée à vos besoins.

Si vous souhaitez une intégration du modèle de fonction, nous développons le schéma et le layout tout en accompagnant les processus d’assemblage et de soudure. Nous pouvons aussi assumer les travaux d’assemblage de petites séries, en interne, dans notre laboratoire si les technologies de packaging requises le permettent.

Cette phase met particulièrement en valeur nos vastes compétences.

Mise en service

Si le PCB assemblé se trouve chez nous, nous nous chargeons de sa mise en service.

Toutes les erreurs et modifications sont documentées dans TRAC. Vous pouvez les consulter en tout temps via le Web en saisissant votre mot de passe. De cette manière, vous pouvez suivre en temps réel l’évolution de la conception. Vous pouvez aussi, en tout temps, consulter la totalité des documents essentiels ayant trait à la conception.

Dès que toutes les fonctions spécifiées sont exemptes d’erreurs, la conception est validée pour la vérification.

Vérification

Votre conception a été implémentée et la série pilote est en attente d’approbation. Grâce à la spécification d’essai précisément définie lors de la phase de spécification, nous sommes en mesure de prouver sur un échantillon représentatif toutes les caractéristiques spécifiées par vos soins.

Vous pouvez donc être certain d’obtenir exactement ce que vous avez commandé.

Industrialisation

Au terme de la phase de développement, l’étape qui mène de la conception à la production en série est un facteur décisif pour le lancement réussi du produit. Forts d’une grande expérience dans les domaines des essais, de l’achat de matériel et de la coordination de la production, vous pouvez compter sur notre assistance professionnelle.

Nous fabriquons nos propres produits entièrement en Suisse et, selon les besoins, aussi en collaboration avec l’Extrême-Orient. Nous agissons aussi en tant que sous-traitant pour l’industrie automobile.

Grâce à nos activités dans des branches hautement standardisées, nous pouvons aussi parfaitement évoluer dans un environnement réglementé.

Testing

Pour minimiser le taux de rebut, nous vous recommandons de ne rien laisser au hasard. Des processus de fabrication validés et des évaluations statistiques fondées sur des échantillons aléatoires vous permettent de garantir la qualité et, le cas échéant, d’intervenir en temps voulu pour apporter les corrections nécessaires.

Achat de matériel

Notre expérience dans le domaine de l’achat de composants électroniques vous aide à sélectionner le fournisseur adéquat. Nous connaissons les distributeurs spécialisés et contactons aussi le fabricant directement, si vous le souhaitez.

NOTRE COMPÉTENCES

Aperçu des compétences. Si vous avez des questions spécifiques, veuillez nous contacter.

La conception de Systèmes sur puce (SoC), de Matrices de portes prédiffusées programmables sur site (FPGA) et de Circuits intégrés à application spécifique (ASIC) est notre métier. Notre longue expérience dans ce secteur nous permet d’intégrer de manière rapide et avantageuse les fonctions adaptées.

Fort d’une longue expérience dans le domaine du développement microélectronique, nous sommes en mesure de vous proposer une direction de projet globale ou partielle. Ces prestations englobent l’accompagnement du développement en interne ou la coordination de la collaboration avec des partenaires externes. Dans ce contexte, nous ne sommes pas limités au développement électrotechnique mais organisons aussi la partie mécanique entière, comme par exemple le montage de votre appareil.

Framework logiciel indépendant de la plateforme

Les applications sont implémentées quelle que soit la plateforme utilisée. Ceci est basé sur la structure logicielle interne, qui fait abstraction de toutes les dépendances matérielles et OS. Cela signifie que la réutilisabilité et la bonne testabilité sont automatiquement intégrées directement dans le flux de travail.

  • STM32Fx
  • ATMEL SAM Vxx
  • SPARC
  • PowerPC
  • Windows
  • Linux

Applications Bare Metal

  • Dans le domaine de la fiabilité élevée (généralement dans l’espace), nous proposons une implémentation allégée et très stable sans beaucoup de surcharge du système d’exploitation.

Applications et pilotes du système d’exploitation

  • Plateformes pour systèmes embarqués: freeRTOS, RTEMSS
  • PC: Windows, Linux
  • Commissioning und Testing Tools

Langages et outils de programmation:

  • C, C++, Visual C++, Python, Perl, Bash scripting
  • GIT, SVN, Trac, Bugzilla, Eclipse, GCC
  • Continuous integration avec Gitlab
  • Unit testing

Vous pouvez nous confier le développement de l’ensemble de votre produit, du concept à l’approbation.
Nous serions heureux de développer un produit partiel pour vous ou de vous accompagner dans l’une des phases de développement.

Notre expérience va des produits simples, peu coûteux aux produits complexes avec une grande fiabilité, tel que requis dans les dispositifs médicaux ou les applications spatiales.

Nous avons déjà implémenté des conceptions avec les processeurs suivants:

  • ARM Cortex Family
  • LEON3
  • Xilinx Embedded Soft-processor (Microblaze, Picoblaze)
  • DSP Intel x86 Family
  • Motorola 68XXX / MPC8xx Family
  • IBM PowerPC
  • Renesas M16C / M32C, o PIC 16Fxxx / 18Fxxx
  • ATtiny-Family

Nous avons déjà implémenté les protocoles de bus suivants:

  • I2C
  • SPI
  • CAN
  • Ethernet
  • USB
  • VME
  • PCI
  • ISA
  • Cardbus
  • ETX
  • MIL Bus 1553
  • Spacewire
  • IBIS

Les conceptions System on Chip (SoC), FPGA et ASIC sont nos compétences clés. Grâce à un savoir-faire approfondi dans ce domaine, nous pouvons mettre en œuvre et tester les fonctions appropriées rapidement et à moindre coût. Sur demande, nous sommes également en mesure de développer des ASIC à signaux mixtes afin de vous offrir la possibilité d’intégrer les composants du circuit analogique.

Nous avons déjà implémenté des conceptions avec les FPGA / SoC suivants:

  • ZYNQ de XILINX
  • Virtex 6 de XILINX
  • Virtex 4 de Xilinx
  • Spartan 6 de XILINX
  • Spartan 4 de XILINX
  • ProASIC3 de Microsemi
  • Cyclone EP1C3 de Intel

Nous avons déjà programmé des FPGA / SoC avec les langages et outils suivants:

  • VHDL, Verilog
  • Mentor HDL Author,  Modelsim, Questasim
  • Xilinx Tools (ISE, Vivado, EDK, PlanAhead, System Generator, ChipScope)
  • Microsemi Libero IDE und SoC
  • Sigasi Studio

Les processeurs suivants ont déjà été intégrés:

  • Microblaze
  • ARM Cortex-A9
  • PowerPC
  • LEON3

Les aspects CEM sont pris en compte dans chaque phase de développement, mais surtout dans la phase de conception. Cela nous permet de mettre en œuvre votre projet dans les délais impartis et en même temps de réduire les coûts pour obtenir l’approbation CEM. Grâce à de nombreuses années de coopération étroite avec des entreprises certifiées CEM, nous pouvons également prendre en charge le processus de certification pour vous.

En janvier 2015, notre salle blanche certifiée ISO 7 a été mise en service. Nous pouvons désormais réaliser des travaux d’assemblage et de brasage ainsi que des processus de test et de mesure notamment.

 Cleanroom_Certificate (PDF, 3’147 KB)

Dans l’environnement de plus en plus complexe de la microélectronique, il est important de garder à l’esprit l’ensemble du système lors de la configuration de la conception. Dans de nombreux cas, les problèmes peuvent être identifiés et évités à l’avance grâce à une analyse détaillée du système. La complexité est également rendue plus gérable grâce à une structuration claire des blocs fonctionnels et de leurs interfaces. Ceci s’applique entre les différents composants électroniques ainsi qu’entre les composants mécaniques et électroniques.

Nous serions heureux de vous préciser quels tests d’homologation vous devez effectuer pour votre produit. Nous vous accompagnons et vous accompagnons dans la certification de votre produit, vous conseillons sur les éventuels ajustements et, si nécessaire, les réalisons pour vous.

NOS RÉFÉRENCES

Aerospace

FLIGHT HERITAGE

Satellites GPS SADE (GPS, Galileo, Beidou)

LISA PATHFINDER

Electronique Front-End: ingénierie système, coordination avec l’ESA, implantation PCB, ingénierie de test, tests CE.

SADE METOP

Développement d’une commande de moteur pas à pas pour le mécanisme d’orientation du propulseur.

Carte d’acquisition de données pour le moteur Sukoij Superjet 100

Développement HW / SW (algorithme de contrôle, DSO et uC), implémentation et test du code VHDL pour 2 CPLD et 2 FPGA, routage et mise en service du PCB.

Spectromètre de masse à gaz LUNA

Gestion de sous-projets, ingénierie système, développements des FPGA et Firmware (échantillonnage à 2 GigaHz, traitement du signal dans le FPGA à 20 Gbit/s)

CASSIS

Caméra pour explorer la surface de Mars: gestion de sous-projets, ingénierie système, développement du FPGA et du Firmware

MedTech

Appareils auditifs

Assistance de l’équipe de recherche dans le cadre de nouveaux développements, tant en matière de matériel que de logiciel.

Analyseurs de sang

Études conceptuelles, spécification, ingénierie matériel et logiciel, développement de FPGA, pilote de diode laser, lecteur de codes-barres et lecteur de cartes à puce, conception de PCB, industrialisation.

Auxiliaire de pipetage

Implémentation d’un auxiliaire de pipetage 96 canaux, connexion au serveur TCP qui contrôle le matériel via RS485.

Automotiv, Industrial, Telecom

PCB filtre moteur

Conception, design, mise en service, industrialisation, production (>5 millions de pièces par an).

Module GPS Track and Trace pour un vélo électrique

Développement matériel et logiciel, conception de PCB, prototypage, production, industrialisation, essais CEM et CE, connexion au serveur via GSM/GPRS, implémentation connexion Bluetooth.

ASIC en fin de vie utile remplacé pour commande d’ascenseur

Ingénierie inverse, développement matériel et logiciel, conception de PCB, production.

Développement HMI pour piles à combustible

Développement matériel et logiciel, conception de PCB, prototypage, production.

Routeur IP pour une solution VoIP

Développement ASIC.

NOS CERTIFICATIONS

Un aperçu de nos certifications et adhésions.

NOS JOBS

Nos postes vacants en ce moment.

To strengthen our quality team, we are looking for a passionate

Product and Quality Assurance Engineer (m/w/d)

nanoTRONIC AG is an innovative Swiss engineering company located in Lyss and Zürich Altstetten.

Specializing in highly regulated industries, we are providing development services to internationally oriented customers.

Our expertise spans sectors such as space, medical technology and railways. Our core competences include building ground support equipment and spacecraft subsystems for high-profile space missions.

We are achieving our goals working in interdisciplinary project teams who combine knowledge and experience on mechanics, electromechanics, electronics, microelectronics and software. Their activities benefit from close support by our quality and compliance department.

As a fast-growing successful company with currently 60+ employees, we are ready to tackle our clients’ demanding technical challenges.

Your responsibilities:

  • Participation of continuous improvement of our Quality Management System
  • Assess, monitor, and improve product quality throughout the requirements, design, development, and manufacturing phases of space electronics projects.
  • Ensure compliance with industry standards, government regulations, and customer specific requirements for space electronics projects
  • Plan and carry out internal and external audits
  • All Product Assurance tasks required by our customers (incl. participation for meeting)
  • Supporting of our engineering team for:
    • Selection of materials and processes (incl. manufacturing process)
    • Selection of electronic components
    • Dependability analyses
  • Management of the process for non-conformances
  • Trainings especially for the behavior in our cleanrooms and ESD areas
  • Carry out of incoming inspections and other inspections during integration, testing and final acceptance (KIP / MIP)
  • Review of test reports and design documents with respect to quality requirements
  • Composition of the required acceptance documentation (EIDP)

What you bring to the table:

  • Master degree in electronic engineering or physics
  • Several years of experience in quality management, ideally in space industry. Additional training as auditor and/or certified ESA inspector is an advantage
  • Basical understanding of electronic circuits
  • Quick comprehension and analytical thinking with independent working style
  • Ability to find fast and target-oriented solutions
  • Very good knowledge of English required. Knowledge of German and/or French is a plus

What we offer:

  • Flexible working hours (40 hours per week).
  • 24 days of paid annual leave.
  • Good social benefits.
  • A growing company where your impact matters.
  • A flat hierarchy in an uncomplicated setting.
  • Opportunity to apply your expertise to a wide range of challenges.

Teamwork is especially important to us. A large part of our success is based on interpersonal interaction for combining expertise from different disciplines. A varied, challenging but exciting range of tasks awaits you.

Apply today!

Send your complete application documents in PDF format to hr@nanotronic.ch.
Applications sent by recruitment agencies will not be considered.

To strengthen our development team, we are looking for a passionate

Senior Hardware Development Engineer (80%-100%)

nanoTRONIC AG is an innovative Swiss engineering company located in Lyss and Zürich Altstetten.

Specializing in highly regulated industries, we are providing development services to internationally oriented customers.

Our expertise spans sectors such as railways, medical technology and space. Our core competences include building ground support equipment and spacecraft subsystems for high-profile space missions.

We are achieving our goals working in interdisciplinary project teams who combine know-how and experience on mechanics, electronics, microelectronics and software. Their activities benefit from close support by our quality and compliance department.

As a fast-growing successful company with currently 60+ employees, we are ready to tackle our clients’ demanding technical challenges.

Your responsibilities:

  • Define specifications in cooperation with our customers, based on their requirements.
  • Concept, sketch, dimensioning and simulation of analog circuits.
  • Design of mixed signal and digital circuits.
  • Cooperation with software, microelectronic and mechanical experts.
  • Provide PCB design guidance to internal PCB design team.
  • Support for commissioning and verification processes.
  • Ensure compliance with our high-quality standards.
  • Write technical documentation.

What you bring to the table:

  • Engineering degree (BSc, MSc) in electrical/electronics engineering.
  • Experienced in diagnostic, debugging, and troubleshooting using lab/bench equipment.
  • 6+ years of experience as a hardware developer.
  • Working proficiency in English required. Knowledge of German and/or French is a plus.
  • Analytical skills, team spirit and a project oriented but self-dependent working style.
  • Willingness to work at our customers’ sites.

What we offer:

  • Flexible working hours (40 hours per week).
  • 24 days of paid annual leave.
  • Good social benefits.
  • A growing company where your impact matters.
  • A flat hierarchy in an uncomplicated setting.
  • Opportunity to apply your expertise to a wide range of challenges.

Teamwork is especially important to us. A large part of our success is based on interpersonal interaction for combining expertise from different disciplines. A varied, challenging but exciting range of tasks awaits you.

Apply today!

Send your complete application documents in PDF format to hr@nanotronic.ch.

As enforcement of our team and replacement due to upcoming retirement we are looking for a

Manager Quality Assurance (m/w/d)

Quality assurance, located in Lyss or Zürich Altstetten

nanoTRONIC is an innovative engineering company with main location in Lyss and a site in Zurich Altstetten. Our Team is working in a broad environment with high competence for the development of Hardware, Software and embedded solutions. Our products are widely used in space, avionic, medicine, automotive and rail. The range of our customers are from small companies up to multinational corporations.

We are looking for an experienced Quality Manager with sound experience in the ISO9000 series, as well as ESA standards ECSS with the focus on Product Assurance. You should be enthusiastic about highly specialized technology and appreciate the contact with international customers.

As Manager Quality Assurance you are responsible for the following main tasks:

  • Continuous improvement of our Quality Assurance Management System and its adaptation to changes of the company organization
  • Plan and carry out internal and external audits
  • All Product Assurance tasks required by our customers
  • Supporting of our engineering team for:
    • Selection of materials and processes
    • Selection of electronic components
    • Reliabilty analyses
  • Management of the process for non-conformances
  • Trainings especially for the behavior in our clean rooms and ESD areas
  • Carry out of inspections during integration, testing and final acceptance
  • Review of test reports
  • Composition of the required acceptance documentation

You bring the following qualifications:

  • Master degree in physics, electronic engineering or similar technical area
  • Several years of experience in quality management, ideally in space industry. Additional training as auditor and/or certified ESA inspector is an advantage
  • Quick comprehension and analytical thinking with independent working style
  • Ability to find fast and target-oriented solutions
  • Very good knowledge of English and German (oral and written), knowledge of French is an advantage
  • Willingness to work at our customer’s or supplier’s location in case of need

Our team is very important to us. A large part of our success is based on our interdisciplinary and collegial cooperation. The flat hierarchies and uncomplicated environment help us achieve this. We work with flexible time models and offer our employees attractive social benefits. A varied challenge with constantly new projects and clients awaits you.

Apply today and send your application letter in pdf format to hr@nanotronic.ch.

 

As a reinforcement for our team, we are looking for a

Senior Project Manager (m/w/d) 100%

Project Management, located in Lyss or Zürich Altstetten

nanoTRONIC is an innovative engineering company with its main location in Lyss and a site in Zurich Altstetten. We are an international Engineering Service provider, specializing in complete embedded systems and VHDL designs for high-reliable products. Our team works in a broad environment with high competence in the development of Hardware, Software, and embedded solutions. We make products that are widely used in space, avionic, medicine, automotive and rail, with customers ranging from small businesses to multinational corporations.

We are looking for an experienced Project Manager with sound experience in the leading of complex projects in the space industry. You should be enthusiastic about highly specialized technology and appreciate contact with international customers.

As Project Manager, you are responsible for the following main tasks:

  • Commercial and overall project lead
  • Responsible for concepts, planning and execution
  • Management of customer requests and relationship
  • Interface between customer, suppliers, and internal operations
  • Negotiate with customers and suppliers
  • Responsibility and accountability for budget, risk, and schedule within the project
  • Management of large offers, from initial contact to release

You bring the following qualifications:

  • Technical master’s degree
  • Very good collaboration and project management skills, senior level
  • At least 5 years of experience in the international space industry
  • Ability to work in a dynamic environment
  • Customer and solution oriented
  • Enjoy challenges and like to go the extra mile
  • Very good knowledge of English and German (oral and written)

 

Our team is very important to us. A large part of our success is based on our interdisciplinary and collegial cooperation. The flat hierarchies and uncomplicated environment help us to achieve this. We work with flexible time models and offer our employees attractive social benefits. A varied challenge with new projects and clients awaits you.

Apply today and send your application letter in pdf format to hr@nanotronic.ch.

As a reinforcement of our team we are looking for a

System Engineer (m/f/d)

System Engineering, located in Lyss or Zürich Altstetten

nanoTRONIC is an innovative engineering company with its main location in Lyss and a site in Zurich Altstetten. We are an international Engineering Service provider, specializing in complete embedded systems and VHDL designs for high-reliable products. Our team works in a broad environment with high competence in the development of Hardware, Software, and embedded solutions. We make products that are widely used in space, avionic, medicine, automotive and rail, with customers ranging from small businesses to multinational corporations.

We are looking for an experienced System engineer, who is enthusiastic about highly specialized technology and appreciates contact with international customers.

As System Engineer you are responsible for the following main tasks:

  • Establish system concepts (Hardware, Software, Microelectronic & Mechanic)
  • Definition of the system architecture
  • Establish the system specification and the interface definition
  • Requirement Management and control of the verification of the requirements
  • Writing test plans
  • Technical project leading
  • Support of the design process: writing specifications, support of the design and development phases, support of commissioning, verification up to validation at customer side
  • Support Product assurance to guarantee the high quality
  • Writing documents in English and German

You bring the following qualifications:

  • Experience as system engineer in the field of embedded systems
  • Good knowledge of electronics
  • BSc/MSc in electronics
  • Quick comprehension and analytical thinking with independent working style
  • Ability to find fast and target-oriented solutions
  • Very good knowledge of English and German (oral and written), knowledge of French is an advantage
  • Several years of experience in the development of complex electronic systems
  • Experience in the space industry is an advantage
  • Willingness to work at our customer’s or supplier’s location if needed

Our team is very important to us. A large part of our success is based on our interdisciplinary and collegial cooperation. The flat hierarchies and uncomplicated environment help us achieve this. We work with flexible time models and offer our employees attractive social benefits. A varied challenge with constantly new projects and clients awaits you.

Apply today and send your application letter in pdf format to hr@nanotronic.ch.

Zur Verstärkung unseres Entwicklungsteams suchen wir ab sofort einen

Software-Gruppenleiter (m/w/d) 100%

Softwareentwicklung, Standort Lyss oder Zürich Altstetten

nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 50-köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software- und Embedded-Lösungen auf dem Gebiet der Avionik, Medizinal- und Weltraumtechnik, Automotivindustrie und Bahntechnik. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.

Wir sind auf der Suche nach einem Software-Gruppenleiter mit einem Background als erfahrener Software-Entwickler, der sich für hochspezialisierte Technik begeistert und den Kontakt mit internationalen Kunden schätzt.

Als Software-Gruppenleiter sind Sie für folgende Hauptaufgaben verantwortlich:

  • Administrative und technische Führung des Software-Entwicklungsteams
  • Mitarbeit bei der Budgeterstellung
  • Mitarbeit bei Konzepten und beim Systemdesign anhand von Spezifikationen, welche zusammen mit den Kunden erarbeitet werden.
  • Design der Softwarearchitektur zusammen mit dem Product Management
  • Durchführung von Reviews
  • Technischer Support des Software-Entwicklungsteams
  • Verantwortung für den SW Prozess
  • Sicherstellung unserer hohen Qualitätsanforderungen unter Einsatz von Testframeworks.
  • Erstellen von Dokumentationen in Deutsch und Englisch.

Sie verfügen über folgende Qualifikationen:

  • FH/ETH Abschluss auf dem Gebiet Embedded Software oder Elektrotechnik mit Vertiefung Software.
  • Eine betriebswirtschaftliche Weiterbildung ist von Vorteil
  • Führungserfahrung
  • Erfahrung in der Erstellung von SW Architektur
  • Fähigkeit, modulare und zielgerichtete Lösungen zu finden.
  • Analytische Denk- und selbständige Arbeitsweise.
  • Sehr gute Kenntnisse im Bereich der hardwarenahen Softwareentwicklung in C/C++.
  • Erfahrungen mit gängigen Entwicklungstools und Softwareprozessen ist von Vorteil (IDE/Toolchain/Continuous Integration/Unit Testing).
  • Mehrjährige Erfahrung in der Entwicklung von Software im Bereich Embedded Software.
  • Gute Deutsch- und Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse von Vorteil.

 

Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Projekten und Kunden erwartet Sie.

Bewerben Sie sich heute und senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch.

Zur Verstärkung unseres Teams suchen wir ab sofort einen

Layouter: Elektroniker / Techniker HF (m/w/d)

Hardware Entwicklung, Standort Lyss oder Zürich Altstetten

nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 50-köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software-, und Embedded-Lösungen auf den Gebieten der Avionik, Medizinal- und Weltraumtechnik. Ebenso sind wir in den Bereichen Automotivindustrie und Bahntechnik tätig. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.

Wir sind auf der Suche nach einem erfahrenen Layouter, der sich für komplexe CAD begeistert und den Kontakt mit internationalen Kunden schätzt.

Als Layouter sind Sie für folgende Hauptaufgaben verantwortlich:

  • Erstellen von Schemas gemäss Vorgabe mit DxDesigner/PADS von Mentor Graphics und Altium Design.
  • Layouten von PCBs mit Xpedition von Mentor Graphics und Altium Design.
    • Platinen bis zu 16 Lagen.
    • High-Speed Designs (USB3, FPGA, usw.).
    • HF Designs (2,4/5 GHz, LBT, usw.).
    • Stark miniaturisierte Designs.
    • EMV kritische Anwendungen.
  • Mitarbeit in der Entwicklung.

Ihr Profil:

  • Abgeschlossene Lehre als Elektroniker.
  • Allenfalls eine weitergehende Ausbildung als Techniker HF.
  • Erfahrungen im Bereich PCB-Layout.
  • Exaktes arbeiten und selbstständige Arbeitsweise.
  • Gute handwerkliche Fähigkeiten (Löten, mechanische Bearbeitung) sind von Vorteil.
  • Gute Deutsch- und grundsätzliche Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse von Vorteil.

Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Projekten erwartet Sie.

Bewerben Sie sich heute! 

Senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch.

Zur Verstärkung unseres Teams suchen wir ab sofort einen

IT System Administrator / IT Spezialist

IT, Standort Lyss oder Zürich Altstetten

nanoTRONIC ist ein innovatives Ingenieurbüro mit Hauptsitz in Lyss und einem Standort in Zürich Altstetten. Wir sind ein international tätiger Entwicklungsdienstleister und sind auf die Entwicklung von kompletten Embedded Systems und VHDL Designs im hochnormierten Umfeld spezialisiert. Unser 40 Köpfiges Team arbeitet in einem breiten Umfeld mit spezialisierter Technologie und entwickelt damit Hardware-, Software-, und Embedded-Lösungen auf dem Gebiet der Avionik, Medizinal- und Weltraumtechnik. Ebenso sind wir im Bereich Automotivindustrie und Bahntechnik tätig. Unser Kundenkreis erstreckt sich von der Kleinfirma bis zum multinationalen Grosskonzern.

Wir sind auf der Suche nach einem IT-Mitarbeiter, der sich für Technik begeistert und bereit ist Neues dazu zu lernen.

Als IT System Administrator sind Sie für folgende Hauptaufgaben verantwortlich:

  • Betrieb, Unterhalt, Ausbau und Dokumentation unserer IT-Infrastruktur.
  • IT Support für die Mitarbeiter.

Sie verfügen über folgende Qualifikationen:

  • Informatiker/in EFZ oder ähnliche Ausbildung.
  • Mehrjährige Erfahrung als Informatiker oder abgeschlossene Ausbildung zum Dipl. Techniker/in HF Informatik.
  • Sicherer Umgang mit Linux und Erfahrung mit Virtualisierung (QEMU und LXC).
  • Schnelle Auffassungsgabe und die Bereitschaft zur Einarbeitung in neue Themen.
  • Kenntnisse in Netzwerktechnik & Sicherheit und Windows Server von Vorteil.
  • Exaktes Arbeiten, selbstständige und gewissenhafte Arbeitsweise.
  • Gute Deutsch- und grundsätzliche Englischkenntnisse (mündlich und schriftlich), Französischkenntnisse sind von Vorteil.

Unser Team ist uns sehr wichtig. Ein Grossteil unseres Erfolges basiert auf unserer interdisziplinären und kollegialen Zusammenarbeit. Dabei kommen uns unsere flachen Hierarchien und ein unkompliziertes Umfeld entgegen. Wir arbeiten in einem flexiblen Zeitmodell und bieten unseren Angestellten gute Sozialleistungen. Eine abwechslungsreiche Herausforderung mit stetig neuen Aufgaben und der Möglichkeit eigene Ideen ein zu bringen erwartet Sie.

Bewerben Sie sich heute!

Senden Sie Ihre kompletten Bewerbungsunterlagen im PDF-Format an hr@nanotronic.ch

NOS CONTACTS

Départements

nanoTRONIC AG
Werkstrasse 27
CH – 3250 Lyss
E-mail:info@nanotronic.ch
Telefon: +41 32 384 69 30
Fax: +41 32 384 69 31

nanoTRONIC AG
Herostrasse 9
CH – 8048 Zürich
E-mail:info@nanotronic.ch
Telefon: +41 32 384 69 30
Fax: +41 32 384 69 31